How to deal with the wear of the transmission parts of the optical film coating machine?

In view of the coating method of the film coater, it is important that both ends of the film coating mechanism are installed on the vertical support arms of the film coater, and the optical film coating mechanism is moved and coated along the screen surface by the conveyance of a belt, a chain or a cable.

With the rapid development of modern manufacturing technology, more and more high-tech products are put into use. Foam optical film coating machines, film coating machines and biaxial slitting machines are all innovative products. They not only provide strong contemporary processing. Support, and also obtain huge benefits in improving the overall application compliance. From the perspective of controlling the foam optical film coating machine, it is important to place the two ends of the film coating mechanism on the vertical support arm of the optical film coating machine, and drive the optical film coating mechanism through the transmission of the belt, or cable TV, the screen is coated with the coating.

The transmission mechanism continues to the servo or variable frequency motor to make it run stably. Master the position of the coating mechanism. Before coating, load a clean and stretched screen from the front of the optical film coating machine, or load a few models from the side. In the screen.

Secondly, after the relevant cleaning process is held, it is necessary to improve the application results. In the models with large frame decision-making, side mounting is more common, because the frame is large and heavy, and the side mounting can make the lifting and movement smaller. The automatic screen optical film coating machine and other automatic screen processing equipment (such as washing equipment, purchasing equipment, drying equipment and developing machine) are easy to control.

The protective film coating machine includes an optical film coating mechanism, the upper surface of the coating blade is fixed in a limited position, and the side of the coating blade is provided with a fixing bolt hole, which reduces the vibration coating quality of the coating blade and further extends the coating The service life of the blade, the upper surface of the drying chamber is continuous with the side of the main body of the drying chamber, the support includes a fixed outer tube and a movable inner rod, and the end of the movable inner rod is provided with a fixed block, one end of the fixed block is opposite to the fixed block, the surface of the fixed outer tube is provided with a slide rail, and the inside of the fixed outer tube is provided with a buffer spring to reduce impact.

In the application, because the lid of the drying box will be closed, the drying box will be well protected and the service life of the drying box will be prolonged. Nowadays, an optical film coating machine can be applied, and the supporting platform is fixed at both ends of the bearing platform. The fixed block is set on the fixed block and can move along the rugged road. The nozzle is set on the side of the bearing platform, and the nozzle and cylinder can continue to move horizontally along the bearing platform, therefore, the application configuration can be promoted to meet different manufacturing needs.

The above is the content of the editor's explanation, everyone understand? If you want to know more content, welcome to contact us, thank you for watching, we will see you in the next issue.